top of page

Air Distribution Products

Fixed Bar Grille - Linear and Modular

Fixed bar grille

  • Grille direct the air with the help of fixed louver inclined at 0/15 deg

  • Made of Heavy extruded aluminum frame and blade. Airmax fixed bar grille suitable forboth supply and return application in cooling and heating.

  • Ideal for side wall, Duct and ceiling application and for specific air pattern. Blade deflection available 0 and 15 deg. Available in one way, two way and four-way blade pattern.

  • 17mm spacing also available for High flow/Exhaust application.

  • Can be supplied without frame suitable for wooden frame fixing application.

  • Maximum single piece length 1800 mm, can be supplied as modular and linear both.

  • Optional Collar damper opposed blade type to control the Volume available in·Aluminum and Steel Construction. Damper operation from face of the opening.

  • High quality GI/Aluminum plenum with side or top inlet to provide the uniform distribution of air through the whole grille.

Single Louver Grille – With Adjustable blade

ScreenShot 2024-06-07 at 14.07_edited.jp

  • Made of extruded Aluminum Frame and Blade.

  • Ideal for ventilation application ,Grilles blades are individually adjustable to provide the desired air pattern .

  • Available with single set of adjustable horizontal vanes or adjustable vertical vanes.

  • Optional Collar damper opposed blade type to control the Volume available in Aluminum and Steel Construction

  • Ideal for side wall, Duct, Ceiling and window application and for desired Jet spread .air pattern

  • Frame is separated from the blades by Nylon Bushing, for the smooth and efficient adjustment of the blades.

  • High quality GI/Aluminum plenum with side or top inlet to provide the uniform distribution of air through the whole grille.

  • Centre support mullion to provide the strength to the grille length exceeding 500mm,to ensure the high quality and rigidity

  • Option Available : Vertical set of blades Without Damper for return air application.

Curved Duct Grille

Curved Duct GRille

  • Airmax Single Louver Curved duct Grille with Fixed blades or single set of adjustable blades.

  • Rolled flanged to match the curved radius of the duct.

  • Back side cut on the flange that enable to adjust the curve of the grille as per site requirement.

  • Factory fitted collar damper

Double Louver Grille – With Adjustable blades

double louver grill with adjustable blades

  • Made of extruded Aluminum Frame and Blade

  • Ideal for ventilation application ,Grilles blades are individually adjustable to provide the desired air pattern

  • Two set of blades are mounted in such a manner that one set is horizontal and another set is vertical.

  • Ideal for side wall, Duct, Ceiling and window application and for desired Jet spread .air pattern

  • High quality GI/Aluminum plenum with side or top inlet to provide the uniform distribution of air through the whole grille.

  • Frame is separated from the blades by Nylon Bushing, for the smooth adjustment of the blades.

  • Optional Collar damper opposed blade type to control the Volume available in Aluminum and Steel Construction

  • Suitable for Heating Cooling and Ventilation application.

  • Centre support mullion to provide the strength to the grille length exceeding 500mm, to ensure the high quality and rigidity.

Egg Crate Grille

Egg Crate Grille

  • Airmax Egg Crate grilles are made of aluminum sheet.

  • With 12.5x12.5 Square high free area core and suitable for return and extract application.

  • High free area and Low pressure drop design.

  • Typical installations include Hotels. Office spaces shop/outlets, restaurants, college/school and commercial or industrial building

Square Diffuser (For Gypsum and Grid Ceiling)

Square Diffuser

  • Made from Extruded aluminum frame and aluminum sheet core.

  • Multicone 4 way type design suitable for ceiling application with concentric arrangement for equal distribution of air in four direction.

  • Spring Loaded Removable and interchangeable core design for cleaning and to access the damper for adjustment& plenum.

  • Airmax Diffusers are specially designed for Ceiling down throw application

  • Also available for Grid ceiling with 600x600mm outer size for neck size 150x150 mm, 225x225 mm, 300x300 mm & 375x375 mm.

  • Optional Collar damper screw operated from face of the diffuser. Lever operated damper is also available on request.

  • Aluminum/GI Plenum Available for Uniform distribution of air.

Architectural Square Aluminum Plaque Type Diffuser

Square PTD

  • Plaque type Ceiling Diffuser Used for supply and return air.

  • Aesthetic look differ it from conventional ceiling diffuser.

  • Suitable for Ceiling application.

  • Optional collar Damper available.

  • Size Available 150x150 ,225x225,375x375, 450x450mm.

  • Suitable for Engineering and architectural Point of View.

  • Removable core from the face of the diffuser.

Architectural Round Plaque Type Diffuser

Round PTD

  • Round Plaque type Ceiling diffuser are compatible for Low and medium pressure application used for supply and return air.

  • Aesthetic round look differ it from conventional ceiling diffuser. Provide a balance between engineering and architectural needs, with a flush appearance.

  • Optional butterfly Damper available.

  • Size Available 200mm, 300mm.

  • Suitable for Engineering and architectural Point of View. Delivers a uniform 360 degree air discharge pattern.

Exhaust Valve (Metal and PVC)

Exhauste V - Metal

  • Airmax Exhaust Valve is suitable for exhaust application and designed for low air flow movement in round duct work.

  • Adjustable center disc, in and out movement of the disc adjusts the flow the air as per the requirement.

  • Each Valve Supplied with round mounting ring, inner core can be easily removable from the ring for the cleaning purpose.

  • Outer body and inner ring made of steel

  • Sizes available :100mm, 125mm, 150mm, 200mm

Circular Diffuser

Circ Diff

​

  • Airmax Circular diffuser can be used in supply and extract application, suitable for fixing into exposed duct or ceiling application.

  • Frame and core is made of high quality Aluminum sheet.

  • Can handle large volume of air at low sound level.

  • Designed to deliver air in 360 deg. Radial pattern at very low noise level.

  • Removable Centre core to access the damper for adjustment and for cleaning purpose.

  • Available with Plenum with top or side entry spigot and with Round Butterfly damper.

  • Sizes available :150mm, 200mm, 250mm, 300mm, 375mm, 400mm, 450mm.

Architectural Helical/Swirl Type Diffuser

Swirl Diffuser

  • Airmax Helical swirl flow diffuser are made in Steel construction with Helical Air pattern.

  • Overall size available 595x595mm suitable for Grid Ceiling.

  • Aesthetic round look differ it from conventional ceiling diffuser.

  • Provide a balance between engineering and architectural needs, with a flush appearance. Proper 4 way type air diffusion.

  • Suitable for Engineering and architectural Point of View.

  • Low smudge risk and easy cleaning.

Architectural Stripline Diffuser

Egg Crate Grille

  • Available in 1 way or 2 way diffusion pattern.

  • Size available on request ( Maximum length 1800mm)

  • Aesthetic round look differs it from conventional ceiling diffuser.

  • Provide a balance between engineering and architectural needs, with a flush appearance. Suitable for Engineering and architectural Point of View.

  • Finned blades provide horizontal airflow pattern

Fresh/Intake Louver with Bird Screen

with Bird screen

  • Airmax Fresh Air Louver is ventilation product used for ventilation application that allow fresh air and keep away water, dirt and unwanted material.

  • Use in air inlets of fresh air ducts and air handling units. It is also suitable for use at dirty air exhaust.

  • Blades inclined at 45 deg.

Perforated Diffuser

Perforated

  • Airmax perforated diffuser used for Ceiling application.

  • Uniform distribution through proper perforation.

  • Suitable for various ceiling style.

Round Grille (PVC and Aluminum)

round

  • Airmax round grille Suitable for round ducts.

  • Suitable for Supply /Exhaust and for ventilation purpose.

  • Dia available 100, 150, 200mm

Slot Diffuser – With Adjustable Vane

Slot diff AV

  • Slot diffusers are always most attractive and effective air control device.

  • Airmax slot diffuser are designed to satisfy architectural applications without compromising air distribution performance.

  • Available in 1 to 8 Slots, 20 and 25mm width.

  • Having Extruded aluminumblack adjustable vane that provide aerodynamic pattern to meet the cooling requirement.

  • Black vane provides the eyelash style.

  • Best Suitable for Large areas Like Hotels, Mall and continuous length residential and commercial applications.

  • Supplied with Alignment strip to avoid fixing issue in continuousmultiple length installation.

  • Adjustable vane controlsthat direct and control the airflow.

  • Available with mitered corner.

  • Airpath can be adjusted 180 deg in each slot to provide desired air pattern as each slot is individually adjustable.

  • Can be supplied with H/M Damper and Plenum.

  • Airmax Slot Diffusers are design for draft free air supply into the required area and with Low pressure drop and low discharge noise.

  • Frame is made of Heavy Aluminum Flush type section.

  • Maximum single section length is 6 feet, length greater than 6 feet are supplied with multiple section along with alignment strip.

  • Standard color: White/Black—other colors are available on request.

Airmax Eye Ball Jet Nozzle AM-EBD

eye ball diffuser

Description

Airmax Eye Ball Jet Nozzles are used for the application where air has to travel long distance. Eye Ball Jet Nozzles are made of Aluminum Construction with in build cone where volume of air is very large and longer throw required. Which is not possible with normal Grilles Diffusers. Like large halls, assembly halls, airport terminals, theaters, arenas.

 

Product detail

  • Constructed from good quality aluminium sheet.

  • Easy fixing with duct collar or frame.

  • Wall or ceiling mounting.

  • Large air volume and long throw.

  • Removable outer profile ring for access to concealed fixing flange.

  • Accurate air throw make it suitable for spot cooling.

  • Available Neck Size: - 200, 275, 315 & 400 mm Dia.

​

Damper option

Two Flap Butterfly Damper to control the air volume, with sleeve for smooth movement of Eyeball. Damper can be operate from the face of the diffuser.

​

Design Features

  • Material: Made of high quality aluminium.

  • Eye ball assembly smoothly rotates in fixed mounting flange-

  • Excellent throw penetration.

  • Easy fixing with duct collar or frame.

  • External ring with a curved profile and spherical inner nozzle using the mechanical principle of eye ball (ball and socket principle).

Airmax Jet Diffuser-AM-JFD

jet diffuser

Airmax Jet Diffuser is suitable for supplying cooled and heated air in large area. It is used for the application where air has to travelling Long distance, where volume of air is very large and longer throw required, which is not possible with normal Grilles Diffusers. Like large halls, assembly halls, airport terminals, theaters, arenas. The air flow pattern can be adjusted in any direction and is suitable for long distance air supply while maintaining low noise levels. Air direction is adjusted by movement of Jet Nozzle as per requirement.

​

Product Detail

  • Can be mounted in virtually/Horizontal any location and any position, allowing freedom for precise air delivery regardless of installation conditions.

  • An Optional Mil I Finish Gl Butterfly damper (2 flap) can be mounted at the Back of the Nozzle which would be operable from the mouth of the Nozzle

  • Easy fixing with duct collar or frame.

  • Wall or ceiling mounting.

  • Large air volume and long throw.

  • Accurate air throw make it suitable for spot cooling.

  • Available sizes are : 250mm, 315mm, 380mm

  • The Core is fixed to axis which allow it to rotate at 360deg reversible of core to make jet pattern or diffuser pattern.

​

Damper Option

Two flap Butterfly Damper to control air volume, with sleeve for smooth movement of core. Damper can be operated from face of the diffuser.

Airmax Spot Diffuser-AM-SD

spot diff

Airmax Spot Type Jet Nozzles are used for the application where air has to travelling Long distance. Spot Jet Nozzles are made of Aluminum Construction, where volume of air is very large and longer throw required, which is not possible with normal Grilles Diffusers. Like large halls, assembly halls, airport terminals, theaters, arenas. Air direction is adjusted by movement of Jet Nozzle as per requirement.

 

Product Detail

  1. External ring with a flat circular and spherical nozzle manually adjustable to any angle within +40 deg

  2. Can be mounted in virtually/Horizontal any location and any position, allowing freedom for precise air delivery regardless of installation conditions.

  3. An Optional Mil I Finish Gl Butterfly damper (2 flap) can be mounted at the Back of the Nozzle which would be operable from the mouth of the Nozzle

  4. Easy fixing with duct collar or frame.

  5. Wall or ceiling mounting.

  6. Large air volume and long throw.

  7. Accurate air throw make it suitable for spot cooling.

  8. Available sizes are : 100mm, 200mm, 300mm 400mm

​​

Damper option

Two Flap Butterfly Damper to control the air volume, with sleeve for smooth movement of Eyeball. Damper can be operate from the face of the diffuser

bottom of page